Data center RM 2416

Surface mesh rebuilt from the raw laser scans, with a clean asset model placed on the measured positions. Click any rack or room door to open it. All values in metres, measured from the registered point cloud.

Room

Length (east–west): 7.45
Width (north–south): 4.63
SW corner notch: 0.84 × 0.67
Floor area: 33.9 m²
Floor to slab: 5.64
Soffit level: 4.77
Cable tray band: 3.61–4.04
East door (double, w × h): 1.57 × 2.17
North door (single, w × h): 0.94 × 2.75
South door (double, w × h): 1.84 × 2.69

Rack rows

Row A length × depth: 4.50 × 0.99
Row B length × depth: 4.21 × 1.05
Rack top height: 2.27
Open aisle between rows: 0.75
Row A racks est.: 6 × 0.75 wide
Row B racks est.: 7 × 0.60 wide

Other equipment

South wall run (l × d × h): 2.43 × 0.45 × 1.43
West wall cabinet (l × d × h): 1.05 × 0.17 × 2.19

Scan mesh (grey surface)

Rack assets (dark cabinets with doors)

Other equipment (measured envelope)

Row sizes come straight from the scan. The racks inside each row have no side panels to measure, so the per-rack split uses standard widths that fill the measured length. Check the count on site before using it for capacity planning. The scan records laser intensity only, so equipment types are not identified.